Stainless Steel Balustrade Cable Railing

Each cable is supplied to your specific dimensions and consists of:

• 4mm diameter stainless steel rope
• Two tubular mounting sockets
• One attached ball & one removable threaded ball
• One tensioning adjuster with lock nut
• Supplied complete with all relevant fixings

Delivered 2 to 3 days from order

How to measure your tubular mount wires:

To order, enter the required length of deck railing cable assemblies at Step 2. Measure the distance between the centre of the inside faces of the tubular fixing posts in millimetres.

Remember - measure twice, cut once! Please be as accurate as possible. Each cable will have an adjustment of plus or minus 20mm.

TIP: You can run deck cables up to 10 metres passing through any intermediate posts to minimise the number of cables you'll need!

Feeding through posts:

The cable can run up to 10 metres in length and the threaded ball can be unscrewed allowing you to feed the cable through any intermediate tubular posts (you'll need a clearance hole of at least 7mm).

Mounting:

These balustrade cables are designed for fixing to tubular stainless steel posts using a scalloped socket and M6 screw.

You will need to drill and tap an M6 hole into the posts to accept the socket and screw. ('tap' refers to the method of drilling a hole whilst adding an internal thread. A special drill bit is required to achieve this.)

Preserve your view: An overall view of a stainless steel tubular balcony balsutrade fitted with 4mm balustrade cable railing. The cables give a sleek finish and provide and unspoilt view from the balcony.

Below is a close up showing the scalloped tube mounting sockets sitting cleanly onto the stainless steel upright baluster.

Photos below show how the tube mount balustrade cable can accommodate angles by swivelling in its socket.

The image below shows the cable passing through an intermediate tubular post. Our deck cables can run up to 10 metres and still achieve good tension. We recommend upright post spacing to be 1.5 metres to 2 metres apart. Horizontal cables should be spaced at 100mm intervals.

This image shows the tension adjuster for the balustrade wires which provides a plus or minus adjustment of 20mm either way

CABLE SYSTEM BROCHURE download here