Horizontal Stainless Steel Deck Cable Railing

Each cable is supplied to your specific dimensions and consists of:

• 4mm diameter stainless steel rope
• Two surface mounting sockets
• One attached ball & one removable threaded ball
• One tensioning adjuster with lock nut
• Supplied complete with all relevant fixings

Delivered 2 to 3 days from order

How to install the S3i surface mount cable railing system

How to measure your deck railing wires:

To order, enter the required length of deck railing cable assemblies at Step 2. Measure the distance between the inside faces of the fixing posts in millimetres.

Remember - measure twice, cut once! Please be as accurate as possible. Each cable will have an adjustment of plus or minus 20mm.

TIP: You can run deck railing cables up to 10 metres passing through any intermediate posts to minimise the number of cables you'll need!

Feeding through posts:

The cable can run up to 10 metres in length and the threaded ball can be unscrewed allowing you to feed the cable through any intermediate deck posts (you'll need a clearance hole of at least 7mm).

Mounting:

These deck balustrade cables are designed for either timber posts or masonry wall surfaces using a 3" countersunk wood screw

If mounting to masonry surfaces please drill a hole and insert a plastic plug before fastening. Sometimes if a wall is particularly brittle or old - a chemical resin may be applied to further strengthen the hold.

Preserve your view: An overall view of decking fitted with 4mm deck rail. The cables give a sleek finish and provide and unspoilt view from the deck.

Below is a close up showing the ball terminals fitting cleanly into the surface mounted sockets.

Photos below show how the deck railing cables can accommodate angles on decking by swivelling in its socket.

The image below shows the deck cable rail passing through an intermediate post. Our deck railing wires can run up to 10 metres and still achieve good tension. We recommend post spacing to be 1.5 to 2 metres apart. Horizontal deck cables should be spaced at 100mm intervals.

This image shows adding tension to the deck railing wires with the tension adjuster that gives an adjustment of 20mm in each direction from your supplied measurement.

CABLE SYSTEM BROCHURE download here